STANDARD ACCESSORY
1. Electric Eye Loop Control System
2. Feed and Straightener rolls with a hard chrome finished
3. Outgoing Catenary to assist and Support the material
4. Motor power arm hold down device
5. Feeding line easily adjusts by advance worm gear screw jacks device
6. Uncoiler-Inverter Device
7. Reference indicator adjuster
8. Inverse curve roll-easy to setup the up curve or down curve feeding exit direction
9. Threading tables device
10. Coil tip flatness device
11. The uncoiler contain the butterfly brakes air compressor
12. A cluster gear set maximizes transmission of horsepower
1. Electric Eye Loop Control System
2. Feed and Straightener rolls with a hard chrome finished
3. Outgoing Catenary to assist and Support the material
4. Motor power arm hold down device
5. Feeding line easily adjusts by advance worm gear screw jacks device
6. Uncoiler-Inverter Device
7. Reference indicator adjuster
8. Inverse curve roll-easy to setup the up curve or down curve feeding exit direction
9. Threading tables device
10. Coil tip flatness device
11. The uncoiler contain the butterfly brakes air compressor
12. A cluster gear set maximizes transmission of horsepower
| Model | NCHL-400D | NCHL-500D | NCHL-600D | NCHL-800D | NCHL-1000D |
| Thickness of material | 1.0-6.0mm | 1.0-6.0mm | 1.0-6.0mm | 1.0-6.0mm | 1.0-6.0mm |
| Width of material | 70-400mm | 70-500mm | 70-600mm | 70-800mm | 70-1000mm |
| Feed roller | 2set | 2set | 2set | 2set | 2set |
| Straightening roller | Upper4/lower3 | ||||
| Production speed | 16m/min | 16m/min | 16m/min | 16m/min | 16m/min |
| Weight of material coil(kg) | 5000 | 5000 | 5000 | 7000 | 7000 |
| Inside dia. Of material coil(mm) | 450-530 | 450-530 | 450-530 | 450-530 | 450-530 |
| Outside dia. Of material coil(mm) | 1600 | 1600 | 1600 | 1600 | 1600 |
| Feed drive servo motor | AC5.5KW | AC5.5KW | AC5.5KW | AC7.5KW | AC7.5KW |
| Uncoil motor | 3.7w | 3.7w | 3.7w | 5.5w | 5.5w |
| Feed level | Customer request± 100 | ||||
| Uncoil expansion | Hydraulic Operation | ||||
| Air pressure | 5kgf/cm 2 | 5kgf/cm 2 | 5kgf/cm 2 | 5kgf/cm 2 | 5kgf/cm 2 |
| Power source | 380V | 380V | 380V | 380V | 380V |
| Machine(A× B× C)Dimension | 5× 2.5× 2.1 | 5× 2.6× 2.1 | 5× 2.7× 2.1 | 5× 2.8× 2.1 | 5× 2.9× 2.1 |
| Model | NCHL-400D | NCHL-500D | NCHL-600D | NCHL-800D | NCHL-1000D |
| Thickness of material | 1.0-6.0mm | 1.0-6.0mm | 1.0-6.0mm | 1.0-6.0mm | 1.0-6.0mm |
| Width of material | 70-400mm | 70-500mm | 70-600mm | 70-800mm | 70-1000mm |
| Feed roller | 2set | 2set | 2set | 2set | 2set |
| Straightening roller | Upper4/lower3 | ||||
| Production speed | 16m/min | 16m/min | 16m/min | 16m/min | 16m/min |
| Weight of material coil(kg) | 5000 | 5000 | 5000 | 7000 | 7000 |
| Inside dia. Of material coil(mm) | 450-530 | 450-530 | 450-530 | 450-530 | 450-530 |
| Outside dia. Of material coil(mm) | 1600 | 1600 | 1600 | 1600 | 1600 |
| Feed drive servo motor | AC5.5KW | AC5.5KW | AC5.5KW | AC7.5KW | AC7.5KW |
| Uncoil motor | 3.7w | 3.7w | 3.7w | 5.5w | 5.5w |
| Feed level | Customer request ± 100 | ||||
| Uncoil expansion | Hydraulic Operation | ||||
| Air pressure | 5kgf/cm 2 | 5kgf/cm 2 | 5kgf/cm 2 | 5kgf/cm 2 | 5kgf/cm 2 |
| Power source | 380V | 380V | 380V | 380V | 380V |
| Machine( A × B × C)Dimension | 5 × 2.5 × 2.1 | 5 × 2.6 × 2.1 | 5 × 2.7 × 2.1 | 5 × 2.8 × 2.1 | 5 × 2.9 × 2.1 |
