S5300 Series L2+ 10GE Static Routing SwitchS5300 series switches are L2+ 10G Switches based on new generation of high-performance hardware and TG-NET Operating System Platform (TOS). It provides a large capacity, high-density GE interfaces,and 10GE uplink interfaces. With extensive service features and IPv6 forwarding capabilities, the S5300 series switches is applicable to various scenarios. For example, it can be used as an access or aggregation switch on campus networks or an access switch in data centers. The S5300 series switches integrates many advanced technologies in terms of reliability, security, and energy saving. It employs simple and convenient means of installation and maintenance to reduce customers' OAM cost and help enterprise customers build a next-generation IT network.FeaturesVarious Port Types and Flexible Port Expansion
The S5300 supports 2*10G subcard and each contains one or two 10G SFP+ ports. The users can flexibly adopt 1~4*10G ports expansion. The series also provides multiple gigabit ports (24 or 48 Base-T ports and Base-X ports), it can be used as an access or aggregation switch on campus networks or an access switch in data centers.
Comprehensive QoS policies and security mechanisms
The S5300 supports strict ARP learning, which prevents ARP spoofing attacks that exhaust ARP entries,The S5300 also provides IP source guard to prevent DoS attacks caused by MAC address spoofing, IP address spoofing, and MAC/IP spoofing.
The S5300 supports DHCP snooping, which generates user binding entries based on users' access interfaces, MAC addresses, IP addresses, IP address leases, and VLAN IDs. DHCP snooping discards invalid packets that do not match any binding entries, such as ARP spoofing packets and IP spoofing packets.This prevents hackers from using ARP packets to initiate man-in-the-middle attacks on campus networks.The interface connected to a DHCP server can be configured as a trusted interface to protect the system against bogus DHCP server attacks.
Comprehensive reliability mechanisms
Besides STP,RSTP, and MSTP, the S5300 supports enhanced Ethernet reliability technologies such as Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a ring automatic protection switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows flexible networking, helping customers build a network with lower OPEX and CAPEX.
Powerful support for services
The S5300 supports IGMP v1/v2/v3 snooping, IGMP filter, IGMP fast leave, and IGMP proxy. The S5300 supports wire-speed replication of multicast packets between VLANs, multicast load balancing among member interfaces of a trunk, and controllable multicast, meeting requirements for IPTV and other multicast services.
Easy deployment and maintenance free
Supports SNMP v1/v2/v3 and provides flexible methods for managing devices. Users can manage the S5300 using the CLI and Web NMS.
Supports SSH2.0 and other encryption, which makes management much more secured.
Supports LLDP protocol for simpler management.
Specification
Items | S5300-28G-4TF | S5300-32F-4TF | S5300-52G-4TF | S5300-52F-4TF | Fixed port | 24*10/100/1000 Base-T ports | 24*1000 Base-X SFP ports | 48*10/100/1000 Base-T ports | 48*1000 Base-X SFP ports | 4*1000 Base-X SFP combo ports | 8*10/100/1000 Base-T combo ports | 4*1000 Base-X SFP combo ports | 4*10/100/1000 Base-T combo ports | 1*Console port | Extended slot | 2* 10G extended slot(rear panel) | 10G subcard | 1*10G SFP+ subcard | 2*10G SFP+ subcard | Switching Capacity | 240Gbps | 280Gbps | Packet Forwarding Capacity | 96Mpps | 131Mpps | Operating environment | Operating temperature: 0ºC-50ºC | Relative humidity: 5%-95% (non-condensing) | Dimensions | 440(L)×285(W)×44.5(H)mm | Weight | <4Kg | Input Voltage | AC:110~240V/50~60Hz | Power Consumption | <60W | <60W |
|
Item | S5300-28G-4TF | S5300-32F-4TF | S5300-52G-4TF | S5300-52F-4TF | Standards | IEEE 802.3ad, Link Aggregation | IEEE 802.3,10BASE-T | IEEE 802.3u,100 BASE-TX | IEEE 802.3ab,1000 BASE-T | IEEE 802.3z,1000 BASE-X | IEEE 802.3ae, 10Gb/s Ethernet | IEEE 802.3x, Ethernet flow control | IEEE 802.1AB-2005,LLDP( Link Layer Discovery Protocol) | IEEE 802.1d, Spanning Tree Protocol | IEEE 802.1w, Rapid Spanning Tree Protocol | IEEE 802.1s,Multiple Spanning Tree Protocol | IEEE 802.1q, VLAN | IEEE 802.1p,QoS | MAC Address | 32K MAC addresses | MAC address learning and aging | VLAN | 4K VLANs | Port-based VLANs | VLAN assignment based on MAC addresses, protocols, and IP subnets | Spanning Tree | STP(Spanning Tree Protocol) | RSTP( Rapid Spanning Tree Protocol) | MSTP(Multiple Spanning Tree Protocol) | Link Aggregation | Max 14 aggregation groups, each supports 16 ports | Max 26 aggregation groups,each supports 8 ports | Static aggregation and dynamic aggregation | Port Mirroring | Many-to-one port mirroring | Reliability | ERPS(G.8032) | Flow Rate Limitation | Rate limiting on packets sent and received by an interface | IP Routing | Static Routing | Multicast | IGMP v1/v2/v3 snooping and IGMP fast leave | MVR(Multicast VLAN Registration) | DHCP | DHCP Server/Client | DHCP Snooping | DHCP Relay | Security | Binding of the IP address, MAC address, interface | Port isolation | 802.1x authentication | AAA authentication, RADIUS authentication | SSH v2.0 | User privilege management and password protection | Management and maintenance | SNMP V1/V2c/V3 and RMON | Remote configuration and maintenance using Telnet | Web NMS | System logs and alarms of different levels |
|
Items | Product Description | S5300-28G-4TF | 24*10/100/1000 Base-T ports;4 *1000 Base-X SFP combo ports;2* 10G extended slot ( Max 4 * 10G ports); | S5300-32F-4TF | 24 *1000 Base-X SFP ports;8*10/100/1000 Base-T combo ports;2* 10G extended slot ( Max 4 * 10G ports); | S5300-52G-4TF | 48*10/100/1000 Base-T ports;4 *1000 Base-X SFP combo ports;2* 10G extended slot ( Max 4 * 10G ports); | S5300-52F-4TF | 48 *1000 Base-X SFP ports;4*10/100/1000 Base-T combo ports;2* 10G extended slot ( Max 4 * 10G ports); | 10G subcard | Subcard Description | S5300-1SFP+ | 1*10G SFP+ subcard | S5300-2SFP+ | 2*10G SFP+ subcard | Optical module | Module Description | SFP+-10GE-SX-MM850 | 10G BASE-X SFP+ optical transceiver-850nm-0.3km-LC | SFP+-10GE-LX-SM1310 | 10G BASE-X SFP+ optical transceiver-1310nm-10km-LC | SFP-GE-SX-MM850 | 1000 Base-X SFP optical transceiver-850nm-0.55km-LC | SFP-GE-LX-SM1310 | 1000 Base-X SFP optical transceiver-1310nm-20km-LC | SFP+-10GE-CU24-3M | 10G SFP+ Copper Twinax cable 3 Meters, passive | SFP+-10GE-AOC-5M | 10G SFP+ Active Optical Cable-5M | Optical fiber armored -LC/PC-LC/PC-GE-MM-3m | 1000 Base-X SFP Optical fiber armored -850nm-3m-LC/PC-LC/PC | Optical fiber armored -LC/PC-LC/PC-OM3-10GE-MM-3m | 10G BASE-X SFP+ Optical fiber armored -850nm-3m-LC/PC-LC/PC |
|
