CD/DVD Glossy oil coating machine (Carton size: 65*50*31cm (length* width* height)
1. Brief:
This machine is designed especially for post-processing of disc print output. After you print any logo or patterns on the Printable CD/DVD, you can use this machine to coat gloss oil on the discs. It will protect disc printing perfectly.
2. Specification:
(1)Disc working width: 140mm
(2)Rated voltage: 220V
(3)Frequency: 50Hz-60Hz
(4)Power: 450W
(5)Machine size: 500*400*220mm (length*width*height)
(6)Carton size: 65*50*31cm (length*width*height)
(7)Machine working temperature:
(8)Coating speed: 2.5m/min, 15 seconds/piece disc
(9)Glossy oil consumption: 5-10ml/square,
3. Machine / Coating advantages:
(1)Waterproof completely
(2)stain resistance
(3)fade resistance
(4)convenient using
(5)energy conservation
(6)Low cost
4. Installation:
1st step: Take out machine and put it on the flat table. There is 8 machine angle (black color) and screws, install them into every angle (small hole) at the bottom of machine and disc tray seperately.
2ND step:
Pour glossy oil into Liquid storage tank (liquid depth can not be more than 1.5cm). And put tank under rubber roller(red color), then put Pipette into tank.
3rd STP:
Plug in (connected machine with power line and socket). Open three switch (right side is main switch, middle is UV lamp switch, left side is circulated liquid switch), then machine stars working. UV lamp needs warming, let machine tick over around 3minutes in advance. After that, you can start coating CD/DVD after oil poured over the entire rubber roller.
5. Cleaning method (you can chose any one of them):
(1) Change glossy oil into alcohol in the liquid storage tank, and let machine work a minute.
(2) Take out the pipette from tank, pour alcohol on the gap of rollers, let machine coat several pieces discs, then rubber rule will be finished cleanliness. If you like, you can use the cotton which is with alcohol to wipt roller directly.
1. Brief:
This machine is designed especially for post-processing of disc print output. After you print any logo or patterns on the Printable CD/DVD, you can use this machine to coat gloss oil on the discs. It will protect disc printing perfectly.
2. Specification:
(1)Disc working width: 140mm
(2)Rated voltage: 220V
(3)Frequency: 50Hz-60Hz
(4)Power: 450W
(5)Machine size: 500*400*220mm (length*width*height)
(6)Carton size: 65*50*31cm (length*width*height)
(7)Machine working temperature:
(8)Coating speed: 2.5m/min, 15 seconds/piece disc
(9)Glossy oil consumption: 5-10ml/square,
3. Machine / Coating advantages:
(1)Waterproof completely
(2)stain resistance
(3)fade resistance
(4)convenient using
(5)energy conservation
(6)Low cost
4. Installation:
1st step: Take out machine and put it on the flat table. There is 8 machine angle (black color) and screws, install them into every angle (small hole) at the bottom of machine and disc tray seperately.
2ND step:
Pour glossy oil into Liquid storage tank (liquid depth can not be more than 1.5cm). And put tank under rubber roller(red color), then put Pipette into tank.
3rd STP:
Plug in (connected machine with power line and socket). Open three switch (right side is main switch, middle is UV lamp switch, left side is circulated liquid switch), then machine stars working. UV lamp needs warming, let machine tick over around 3minutes in advance. After that, you can start coating CD/DVD after oil poured over the entire rubber roller.
5. Cleaning method (you can chose any one of them):
(1) Change glossy oil into alcohol in the liquid storage tank, and let machine work a minute.
(2) Take out the pipette from tank, pour alcohol on the gap of rollers, let machine coat several pieces discs, then rubber rule will be finished cleanliness. If you like, you can use the cotton which is with alcohol to wipt roller directly.
